18AMC thermal protector bimetal thermal switch

18AM-C thermal switch,bimetal thermostat, thermal protector,motor thermal protector,motor protector, resettable thermal fuse, bimetal switch,lighting thermal protector,thermal protector for fan motor,bimetal thermal protector,thermal overload protector,thermal overload protector switch, overload switch, thermal cutoff switch, thermal cutout switch, motor protection thermal switch, thermal cutoff, thermal cutoff fuse, thermal cutoff switch, thermal cutout switch, bimetal temperature switch, bimetal thermostat switch

Snap action thermal protector , automatic reset type with UL,VDE, CB, CCC , Rohs compliant

Work principle:

18AM-C thermal protector is a temperature automatic response devide and is connected in series to the winding of motor. 

 Normal closed type:  cutoff at temperature rises.  

Normal open type: contacts closed (ON) at temperature rises

Application:

B2D series thermal protectors are devices for protecting against overload and over temperature. They are usually used for AC 220v /50Hz one phase motors to protect motor from over temperature caused by unusual state such as overload, blocked up. They are also used for protecting against over temperature & temperature control in lighting appliance, heater, fluorescent ballast, IC etc.

Main features:

Snap action, normal closed, auto reset

Contact rating: 8A/125VAC; 5A/250VAC; 8A/24VDC 
Thermal switch dimension: 15X7.3X3.9mm

Open Temperature: 50C to 155C,  in 5C increasement

Tolerance for open temperature: +/-5C

Cable:Stardard:AWG20 silicon cable or AWG#22 UL3326 PE cable, 70mm long, special requests accepted
Approval: UL,VDE, CQC,CB, Rohs compliant

Advantage:

Good quality, good price, prompt delivery guaranteed.

Cutoff temperature table:(reset temperature for reference)

Dimension:

 with leadwire and with insulation sleeve, the cable and length can be made according to customer's request:

15X7.3X3.9mm with 70mm cable, special requests for the cable acceptable

Ultimate Tripping Current Vs Ambient Temperature ( for reference only)

Other models for your reference

Storage Condition:

During the transport and storage, the packages can not be exposed to snows or rains, and should avoid strong force outside.  It shouId be stored in a dry and ventilative warehouse.

Customers' special requests accepted. Pls contact us for more.